Da un vecchio 486sx realizzate questo Router affidabile e stabile, il progetto
FREESCO ecco le principali caratteristiche:
- a simple bridge with up to 10 Ethernet segments
- a router with up to 10 Ethernet segments
- a dialup line router
- a leased line router
- an Ethernet router
- a dial-in server with up to 10 modems (with multiport modems).
- a time server
- a dhcp server
- a http server
- a ftp server
- a dns server
- a ssh server
- a print server (requires TCP/IP printing client software)
- Minimum install requires a 486sx with 12mb of ram. 16+mb of ram is recommended for enabling servers
- Modes of operation. ethernet, dialup, leased, bridge, RAS, Printer server. Some of these modes can run at the same time as well as switching between dialup and ethernt modes
- 2.0.39 Linux kernel
- Support for up to ten networks cards
- Support for up to ten printer queues
- Support for up to ten modems, although only four regular modems. Support includes Unix 4 or 8 port modems
- FREESCO v.0.3.x can run entirely from ram. This requires at least 16+MB
- FREESCO v0.3.x can run up to 16MB of packages with ramdisks enabled on a floppy install
- Ident, DHCP, DNS, Print, SSH, FTP, HTTP servers
- RAS (Remote Access Server) for dialin and nullmodem connections
- PPPoE, and PPtP clients
- Support for Dynamic DNS, Zonedit, DHS, Loopia, and Domain-dns as well as a unsupported dynamic DNS clients that can be configured as you need it.
- Limited support for SCSI hard drives
- FREESCO v0.3.x can be installed on any FAT 16/32 IDE drive on the primary or secondary controller and the primary or secondary drive
- There is an official ext2 package, built into the advanced package menu, for formatting and installing FREESCO from the floppy to create an ext2 installation on a hard drive.
- The specially modified 2.0.39 Linux kernel has an increased masq table and the icmp leak patch for security as well as many other patches to enhance it's abilities.
- ISA PnP so network cards and PnP modems can be configured.
F.MadaroonMonday 14 April 2008 - 23:23:53
comment: 0